MP3-MAP005

Instruction for mp3 pen 1.earphone plug /USB Port: this can be used as earphone plug and USB Port; 2.TF card plug: Insert TF card according to the correct direction; Press the card, it can spring out automatically;. 1. PLAY button: turn on/play/pause/turn off Press “ ” to turn on the player, the light glitters; In the playing mode, press “ ” to pause current playing, long press “ ” to turn off the player. The player shuts off by itself if no operation on it. 2. MODE button: volume adjusting/options for playing mode Short press ‘MODE’ button, the unit goes into volume adjusting mode; MODE light will keeplighting; Long press “MODE” button, the unit goes into playing mode; In the playing mode, the MODE light glitters once a second; it glitters each 3 second when playing repeatedly. adjust volume, MODE light glitters for 5 seconds. Press ‘>>’ or ‘<<’ to increase or decrease volume. Long press ‘MOD’ to choose playing mode: normal / playing / repeat; In the playing mode, the MODE light glitters once a second; it glitters each 3 second when repeatedly playing. 3. NEXT button ‘>>’ : increase volume/next song/onward When the unit is in volume adjusting status, this button can be used as volume increasing; When the unit is in playing status, this button can be used as next song/onward; Short pressing then next song, long pressing then onward; 4. PRVE button ‘<<’ : decrease volume/previous song/backward When the unit is in volume adjusting status, this button can be used as volume decreasing; When the unit is in playing status, this button can be used as previous song/backward; Short pressing then next song, long pressing then backward; 7. EQ/recording: options for EQ mode/function of recording Short press ‘EQ-R’ to choose EQ mode: normal/low voice/pop/classic/rock; Long press ‘EQ-R’ to choose recording mode; In this mode, the light glitters shortly once each second when recording; short press to stop or continue recording, the light is glittering all the time; Long press to withdraw from recording; Recording and music file will be stored all together; when TF card added-on, recording file is preserved in card first. Notice: When voltage of battery is too low, the EQ and PLAY lights alternate lighting fast to indicate that the battery is going to be used out. Installation of battery: twist off the pen as to the sculpture, then put the battery into pen pipe. Pay attention to cathode and anode of battery. Technical specification: 1.Support mp3 and wma format 2.Recording function with high quality, format: wav 3.Sample ratio for recording: 8KHz 4.S/N ratio>90dB 5.Output power for earphone: 5mW+5mW 6.AAA battery